SUPRIM and its logo concept are inpired by diamond crystals and geometry.
A celebration of decades of MSI graphics card mastery, SUPRIM is crafted with qualities that evoke prestige.
High-quality materials and construction are emphasized by the geometry of points, lines, and planes.
The Ultimate Platform for Gamers and Creators
Powered by GeForce RTX 40 Series and DLSS 3
-
New Streaming Multiprocessors
Up to 2x performance and power efficiency
-
Fourth-Gen Tensor Cores
Up to 4x performance with DLSS 3 vs. brute-force rendering
-
Third-Gen RT Cores
Up to 2x ray tracing performance
Cutting-Edge GPUs
NVIDIA Ada Lovelace architecture
Realistic and Immersive Graphics
Dedicated Ray Tracing Cores
AI-Accelerated Performance
NVIDIA DLSS 3
Game-Winning Responsiveness
NVIDIA Reflex low-latency platform
Built for Live Streaming
NVIDIA Encoder
AI-Enhanced Voice and Video
NVIDIA Broadcast app
Fast-Track Your Creativity
NVIDIA Studio
Performance and Reliability
Game Ready and Studio Drivers
CHANGE THE GAME
Ascend to a superior experience with SUPRIM. See, hear, and feel a profoundly elevated graphics card built with high-quality materials and assembled with enthusiast features.
DESIGN
01. SHARP LOOKS
The second iteration of SUPRIM inherits the exterior design philosophy of its predecessor, with a brushed metal cover, octagon-shaped fan cutouts and chevrons around each fan.
BRUSHED METAL
POLYGON SHAPES
02. POLISHED EDGES
Beveled edges are polished several times with a diamond-tipped cutter to achieve a mirror-finish. Clean sharp lines emphasize the metal construction to sight and touch.
03. FINISHING TOUCHES
The motif of straight lines continue around the fans with octagonal cutouts featuring polished 45-degree beveled edges.
TRI-FROZR 3S
THERMAL DESIGN
Upgraded fans, airflow control, and other thermal innovation make TRI-FROZR 3S the best air-cooling solution yet from MSI.
TORX FAN 5.0
TORX FAN 5.0 incorporates design improvements that result in +23% increased airflow compared to an axial fan.
The resulting increased airflow is +10% compared to TORX FAN 4.0 and +23% compared to an axial fan.
Ring arcs link sets of three fan blades that focus airflow into the heatsink. Blades tilt 22 degrees to maintain high-pressure airflow even at slower rotational speeds.
The trailing end of each ring arc folds inward to reduce turbulence and drag.
A fan cowl extends a bit beyond the general enclosure to lengthen the wind’s passageway, allowing airflow to stabilize and move smoother through the fans.
Airflow stability is further improved with both a fan cowl that extends shortly beyond the enclosure to lengthen the air passageway and bulging notches under the cowl to reduce recirculation.
COPPER BASEPLATE
FACING THE HEAT HEAD-ON
The solid nickel-plated copper base is CNC machined from a single piece of metal. Precision cuts and no welds allows heat from the GPU and memory to be immediately captured by the copper baseplate and then rapidly transferred to the heatsink.
KEEPING THE CORE COOL
CORE PIPE
Core Pipes are precision-crafted to make maximum use of the available space. A squared section of heat pipes fully touch the GPU baseplate to then spread heat along the full length of the heatsink.
AIRFLOW CONTROL
Level up with the Wave-curved 3.0 design featuring updated deflectors. A composition of filled fins, mingled waves, and V-shape fins are each placed in an optimal zone on the graphics card to disrupt unwanted airflow harmonics and reduce noise.
AIRFLOW CONTROL
Sections of different heatsink fins disrupt unwanted airflow harmonics and reduce noise.
FILLED FINS
WAVE-CURVED 3.0
AIR ANTEGRADE FIN
FILLED FINS
Updated heat pipe pathing has allowed more space for additional heatsink fins.
WAVE-CURVED 3.0
Additional efficiency is gained by adjusting the size of the wave edges under the fan motor and other spots where there is less airflow.
AIR ANTEGRADE FIN
Fins with a V-shaped cutout are located at the airflow passthrough to improve flow efficiency. Optimizing the inclination angle and increasing the wave notch shapes the air resistance towards the center, pushing out warm air faster like a nozzle.
METAL BACKPLATE
Thermal pads under the sturdy metal backplate provide additional cooling while the flow-through ventilation reduces trapped heat.
ZERO FROZR
The fans completely stop when temperatures are relatively low, eliminating all noise when active cooling is not needed. The fans will automatically start spinning again when the heat is on during gaming.
DOUBLE-BALL BEARING
Two sets of durable ball bearings spin the TORX FANs for years of intense and lengthy gaming sessions.
PCB and Reinforcement
Anti-Bending – Die Casting
RELENTLESS DEFENSE
A die-cast anti-bending plate reinforces the whole card while thermal pads allow cooling to reach critical component underneath.
* All images and descriptions are for illustrative purposes only.
Visual representation of the products may not be perfectly accurate.
Bracket Stand
YOUR SUPPORT CHARACTER
A bundled support stand can be attached to the PC case to hold up the graphics card.
EXTENSIVELY DEVELOPED.
EASY TO USE!
MSI CENTER
AFTERBUNER
BRINGING IT ALL TOGETHER
MSI's exclusive MSI Center software helps you get the most out of your MSI products. Monitor, tweak, and optimize in real-time with just a few clicks.
Learn MoreGAMING MODE
Get Ready to Game
Create game profiles with personalized graphics card settings including performance, True Color, and more.
Learn MoreMYSTIC LIGHT
Splash on Some Color
Mystic Light gives you complete control of the RGB lighting for both MSI devices and compatible third-party RGB products both inside and outside your system.
Learn MoreRECOMMENDED PACKAGES
After you download MSI Center, you will be presented with a few categories to choose such as gamers, creators, work, etc. Each category contains a set of features recommended MSI for you to install.
Learn MorePRECISION CONTROLS, UNLIMITED POWER
MSI Afterburner is the most recognized and widely used graphics card overclocking software in the world. Take full control of the graphics card while monitoring key system metrics in real-time. It’s free to use and compatible with most other vendor graphics cards.
Learn MoreONE-CLICK OVERCLOCKING
OC Scanner
OC Scanner is an automated function that will find the highest stable overclock settings for your graphics card. Giving you a free performance boost for a smooth in-game experience thanks to higher FPS.
Learn More
GeForce RTX™ 4070 Ti SUPRIM X 12G
WITH DLSS 3
NVIDIA® GeForce RTX™ 4070 Tiで、素晴らしいゲームと創作活動のための装備を整えましょう。この機能は、より効率的に、現在のマルチコア プロセッサの性能を活用し、すばらしい陰影やモザイク加工などのテクスチャ技術をサポートするために作られました。高速なレイトレーシング、DLSS 3によるAIアクセラレーション・パフォーマンス、新しい創造性などを体験してください。
ブーストクロック / メモリスピード
- Extreme Performance: 2790 MHz (MSI Center)
Boost: 2775 MHz (GAMING & SILENT Mode)
21 Gbps - 12GB GDDR6X
- DisplayPort x 3 (v1.4a)
HDMI™ x 1 (Supports 4K@120Hz HDR, 8K@60Hz HDR, and Variable Refresh Rate as specified in HDMI™ 2.1a)
TRI FROZR 3S 冷却システム
- TORX Fan 5.0: 外輪部で連結された3つのファンブレードとファンカウルが連動し、高圧の気流を安定させ、維持します。
- 銅製ベースプレート: CNC加工により削り出されたニッケルメッキ銅製のベースがGPUやメモリの熱を取り込み、Core Pipeに素早く伝達します。
- Core Pipe: 角型のヒートパイプがGPUに最大限に密接し、ヒートシンク全体に熱を拡散させます。
- Airflow Control: ヒートシンクに配置された様々なエアフロー調整機能が、不要な気流の乱れを抑制し、ノイズを低減します。
Dual BIOS
- フルパフォーマンスのGAMINGモードと低騒音のSILENTモードを選択することができます。
MSI Center
- MSIのオリジナルソフトウェアであるMSI Centerは、お使いのMSI製品を最大限に活用するのに役立ちます。数回のクリックでリアルタイムに監視、調整、最適化することができます。
Mystic Light
- MSIおよび互換性のあるサードパーティ製RGB製品のライティングを制御できます。
